The DeWalt 5137151-00 Crankshaft is a critical internal pump component specifically designed for use with KU-2 air compressor pump assemblies. It converts rotational motion into piston movement required for air compression.
Common Issues This Crankshaft Addresses:
- Compressor pump not building pressure.
- Loud knocking or metallic noise from pump housing.
- Excessive vibration during operation.
- Oil leakage near crankcase or shaft area.
- Pump seizure or sudden stoppage under load.
Excessive Pump Noise / Knocking.
Quick Check: Listen for rhythmic knocking during piston stroke cycle.
Fix Suggestion: Check connecting rod and bearing alignment; replace crankshaft if journal wear is detected.
Prevention Tip: Avoid running compressor under low-oil or high-heat conditions.
Compressor Not Building Pressure.
Quick Check: Verify piston movement and crankshaft rotation continuity.
Fix Suggestion: Replace crankshaft if it is slipping, cracked, or causing uneven piston stroke in KU-2 pump assembly.
Prevention Tip: Perform periodic pump inspections to catch early mechanical wear.
Vibration or Imbalance During Operation.
Quick Check: Check motor-to-pump coupling alignment and shaft rotation smoothness.
Fix Suggestion: Reinstall crankshaft properly or replace if imbalance is caused by shaft deformation.
Prevention Tip: Ensure correct torque settings during pump rebuild or crankshaft installation.
Oil Leakage Around Pump Housing.
Quick Check: Inspect crankshaft seal area for oil seepage.
Fix Suggestion: Replace crankshaft seals along with inspection of shaft surface condition.
Prevention Tip: Avoid overfilling crankcase and replace seals during major servicing.
Customer Experience: Technicians working with KU-2 pump systems often report that replacing the DeWalt 5137151-00 crankshaft restores smooth piston motion and stabilizes pressure build-up. Some users note that addressing crankshaft wear early prevents costly full pump rebuilds.
Validate your login