Ariens 53213100 24" Right-Hand Serrated Rake W/Zerk

Ariens 53213100 24" Right-Hand Serrated Rake W/Zerk supports the right-side scraping area of an Ariens snow blower, helping maintain a defined working edge while providing a dedicated lubrication point.

This component helps address the following concerns:

• Right-hand rake edge sits unevenly.

• Serrated teeth become rounded from use.

• Rake produces noticeable vibration.

• Grease escapes around the zerk fitting.

• Rake hardware shows signs of movement.

Uneven Rake Position

Quick Check: View the rake edge from the front and compare its position with the surrounding scraper area.

Fix Suggestion: Reposition the rake and secure its mounting points so the working edge sits evenly.

Prevention Tip: Review rake placement whenever scraper-area hardware receives service.

Excessive Tooth Rounding

Quick Check: Run a visual comparison across the serrated teeth for shortened or noticeably rounded sections.

Fix Suggestion: Renew the rake when tooth wear has changed the shape of the working edge.

Prevention Tip: Clear hidden stones and other hard debris from the snow-clearing path when practical.

Vibration At Rake

Quick Check: Look for loose fasteners or movement around the rake mounting area with the blower shut down.

Fix Suggestion: Tighten the affected hardware and examine the mounting surfaces for damage.

Prevention Tip: Include fastener checks during seasonal scraper and skid shoe inspections.

Grease Leakage Around Zerk

Quick Check: Examine the grease fitting and surrounding area for fresh lubricant escaping from the connection.

Fix Suggestion: Clean the fitting and assess it for damage before servicing it with the recommended lubricant.

Prevention Tip: Keep the zerk free of packed snow, dirt, and other debris.

Customer Experience: One owner noticed movement around the right-hand rake and found that securing the mounting hardware restored a more stable working position.