Ariens Company 04182059 Snow Blower Scraper Blade 32"
Specifications:
| Attribute | Details |
|---|---|
| Brand | Ariens Company |
| Part Number | 04182059 |
| Product Type | Scraper Blade |
| Blade Size | 32 inches |
| Application | Snow Blower |
Description
Product Overview:
Helps clear snow close to the ground by maintaining contact with the clearing surface beneath the snow blower housing. The Ariens Company 04182059 Snow Blower Scraper Blade 32" is an OEM replacement component. Its 32-inch designation identifies the specified blade size, while its working edge helps remove residual snow as the machine moves across the clearing surface.
Surface Clearing Performance:
The scraper blade works along the lower edge of the snow blower housing to remove remaining snow from the ground. Its contact edge helps maintain a closer clearing finish during normal snow removal.
Edge Condition:
The blade's material and working-edge condition influence its durability under repeated contact with the clearing surface. Abrasion can gradually change the edge profile, while corrosion may deteriorate exposed areas depending on material and storage conditions.
Wear Resistance:
The scraper blade is exposed to repeated contact with snow, ice, and the clearing surface during operation. This contact gradually wears the working edge and may cause deterioration over time. Monitoring the edge for thinning, uneven wear, or physical damage helps determine when replacement may be needed.
Replacement Guidelines:
Replace the Ariens Company 04182059 Snow Blower Scraper Blade 32" when excessive wear, bending, cracking, or damage affects its ability to maintain proper contact with the clearing surface. Replacement may also be necessary when the blade can no longer clear residual snow effectively or maintain the intended clearance beneath the snow blower housing.
Common Signs of Wear:
- Excessive wear or thinning along the working edge.
- Bent or deformed blade sections.
- Cracks or visible physical damage.
- Uneven wear across the blade length.
- Reduced effectiveness when clearing residual snow.
- Changes in the intended clearance beneath the housing.
Equipment Compatibility:
The Ariens Company 04182059 Snow Blower Scraper Blade 32" is an OEM replacement part intended for compatible Ariens snow blower models that specify this component. Verify the snow blower model number, original part number, and applicable Ariens parts diagram before purchasing.
The Ariens Company 04182059 Snow Blower Scraper Blade 32" may require attention when wear, mounting movement, or improper blade position affects snow clearing near the ground.
Common Symptoms:
• Snow passes beneath the scraper edge.
• The blade leaves an uneven cleared surface.
• Visible wear appears along the scraping edge.
• Scraper hardware allows noticeable movement.
• The blade sits unevenly across the housing.
Excessive Edge Wear
Quick Check: Run a visual check along the entire scraper edge for thinning, bends, or heavy abrasion.
Fix Suggestion: Renew the worn scraper blade when the scraping edge can no longer maintain suitable contact.
Prevention Tip: Include the scraper edge in regular pre-season inspections.
Blade Position Shift
Quick Check: Compare the scraper blade position from the left side to the right side of the housing.
Fix Suggestion: Realign the blade so it sits evenly across the lower housing.
Prevention Tip: Verify blade position after scraper hardware has been serviced.
Mounting Hardware Movement
Quick Check: Gently check the installed blade for unwanted movement at its mounting points.
Fix Suggestion: Secure the mounting hardware and make sure the scraper remains firmly attached.
Prevention Tip: Examine mounting points before extended snow-clearing sessions.
Uneven Clearing Path
Quick Check: Inspect the lower edge for sections that sit noticeably higher or lower than the surrounding blade.
Fix Suggestion: Adjust the scraper position to provide an even edge across the 32-inch width.
Prevention Tip: Check the scraper bar whenever uneven snow removal becomes noticeable.
Customer Experience: A customer reported that improved surface scraping after fitting a new 32-inch scraper blade in place of the worn one.
-
What does the Ariens Company 04182059 Snow Blower Scraper Blade do?
The scraper blade helps remove residual snow from the clearing surface by working along the lower edge of the snow blower housing.
-
What is the purpose of a 32-inch scraper blade?
The 32-inch designation identifies the specified blade size. Confirm the required dimensions and part number against the equipment's parts documentation.
-
When should the scraper blade be replaced?
Replace it when excessive wear, bending, cracking, or other damage affects ground contact or clearing performance.
-
What are the common signs of a worn scraper blade?
Common signs include a thinned working edge, uneven wear, deformation, visible cracks, and reduced effectiveness when clearing snow close to the ground.
-
How do I confirm compatibility with my snow blower?
Check the machine's model number and original part number against the applicable Ariens parts diagram to confirm that 04182059 is the correct replacement.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More