Ariens Company 7100726 Tire K478 15" X 5.00"-6"
Specifications:
| Attribute | Details |
|---|---|
| Brand | Ariens Company |
| Part Number | 7100726 |
| Product Type | tire |
| Designation | K478 |
| Tire Size | 15" x 5.00"-6" |
Description
Dimensions:
- Weight: 5 lbs
Product Overview:
Provides the ground-contact surface for the wheel assembly, supporting traction, rolling movement, and maneuverability during equipment operation. The Ariens Company 7100726 Tire K478 has a nominal size designation of 15" x 5.00"-6" and serves as an OEM replacement component for Ariens equipment requiring this tire configuration.
Traction and Wheel Support:
Transfers contact between the wheel assembly and the operating surface, helping the equipment maintain traction and move across varying ground conditions. The tread pattern contributes to surface grip, while the tire supports the wheel’s rolling function.
Replacement Guidelines:
Replace the Ariens Company 7100726 Tire K478 15" X 5.00"-6" when significant tread wear, cracking, punctures, sidewall deterioration, or deformation compromises traction or reliable rolling. Replacement is also required when persistent air loss, where applicable, prevents the tire from maintaining its required operating condition.
Common Signs of Wear:
- Reduced tread depth affecting traction.
- Cracks or deterioration along the sidewall.
- Punctures or persistent air loss, where applicable.
- Bulging, deformation, or visible structural damage.
- Uneven tread wear affecting consistent rolling.
- Reduced traction or irregular movement during operation.
Equipment Compatibility:
This OEM Ariens Company tire is intended for equipment applications requiring part number 7100726 and the K478 tire designation. Confirm the equipment model and required tire configuration against the applicable Ariens parts information. Matching nominal dimensions alone does not establish suitability because tire construction and tread design may vary.
Ariens Company 7100726 Tire K478 15" X 5.00"-6" supports snow blower wheel movement by providing the tire surface needed for ground contact, traction, and stable travel across cleared or snowy areas.
This part fixes the following symptoms:
• Snow blower pulls to one side during operation.
• Tire loses traction on snow-covered areas.
• Wheel shows cracks or visible wear.
• Snow blower movement becomes uneven.
• Tire pressure drops repeatedly during use.
Reduced Traction on Snow
Quick Check: Inspect the tire tread and surface condition for wear, cracks, or loss of grip.
Fix Suggestion: Check tire condition and replace the worn tire when traction cannot be restored.
Prevention Tip: Avoid operating on sharp debris that can damage the tire surface.
Uneven Snow Blower Movement
Quick Check: Compare both wheels for differences in size, pressure, or tread condition.
Fix Suggestion: Adjust tire pressure and verify the wheel installation for proper alignment.
Prevention Tip: Check both tires before seasonal snow clearing.
Tire Air Loss
Quick Check: Examine the tire sidewall, valve area, and mounting surface for leaks.
Fix Suggestion: Repair minor air leaks when possible or replace the damaged tire assembly.
Prevention Tip: Store the snow blower in a location that protects tires from damage.
Cracked Tire Surface
Quick Check: Look for aging cracks, dry areas, or visible damage around the tire.
Fix Suggestion: Replace the tire if the rubber condition affects safe snow blower operation.
Prevention Tip: Keep tires clean and inspect rubber condition during storage periods.
Customer Experience: A snow blower owner noticed improved handling consistency after changing an older tire that had developed wear and reduced traction during winter use.
-
What is the Ariens 7100726 K478 tire used for?
It provides the ground-contact surface for the wheel assembly, supporting traction and equipment movement during operation.
-
What do the dimensions 15" x 5.00"-6" mean?
The designation describes the tire’s nominal size: 15-inch overall diameter, 5.00-inch nominal section width, and 6-inch nominal rim diameter.
-
When should the Ariens 7100726 tire be replaced?
Replace it when severe tread wear, cracking, punctures, sidewall deterioration, or deformation affects traction or reliable rolling.
-
Can another 15" x 5.00"-6" tire replace the Ariens K478?
Not automatically. A tire with the same nominal dimensions may have a different tread pattern or construction. Confirm that the alternative meets the equipment’s application and wheel requirements.
-
How do I verify that Ariens part 7100726 fits my equipment?
Match part number 7100726 and the K478 designation against the applicable Ariens parts catalog using your equipment’s model and serial information.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More