Briggs & Stratton 591158 Engine Rewind Starter

Briggs & Stratton 591158 Engine Rewind Starter provides manual starting action for applicable small engines, helping turn the engine over when the recoil handle is pulled.

This component helps address the following concerns:

• Starter rope fails to retract.

• Recoil handle feels loose.

• Rope becomes difficult to pull.

• Starter assembly makes unusual noise.

• Engine does not turn over properly.

Rope Fails to Retract

Quick Check: Pull the starter handle slightly and observe whether the rope returns into the housing.

Fix Suggestion: Inspect the recoil mechanism and replace the starter assembly if the return action is damaged.

Prevention Tip: Allow the rope to retract gradually instead of releasing it abruptly.

Difficult Rope Pull

Quick Check: Pull the handle gently and note whether unusual resistance occurs.

Fix Suggestion: Review the starter assembly for binding or internal damage before continued use.

Prevention Tip: Keep dirt and grass debris away from the starter housing.

Loose Recoil Handle

Quick Check: Assess the handle and rope connection for unusual looseness.

Fix Suggestion: Secure the handle connection or replace damaged starter components as needed.

Prevention Tip: Examine the starter rope closely and handle during routine engine maintenance.

Starter Noise

Quick Check: Listen for grinding, scraping, or rattling sounds while pulling the starter.

Fix Suggestion: Stop using the starter if abnormal noise continues and inspect the recoil assembly.

Prevention Tip: Keep the starter housing free from accumulated debris.

Customer Experience: After replacing the rewind starter, one customer noticed the engine could be pulled over smoothly again during starting.