Dewalt N638742 32" Fence Assembly

The Dewalt N638742 32" Fence Assembly provides a stable cutting reference for table saws. It aligns with the blade to position material properly and maintain consistent rip cuts across the table surface.

This part fixes the following symptoms:

• Fence fails to lock firmly in position.

• Rip fence shifts during cutting.

• Fence sits out of parallel with the saw blade.

• Sliding action becomes rough or uneven.

• Rip measurements are no longer accurate.

Fence Will Not Lock Securely

Quick Check: Engage the locking handle and check for movement after the fence is secured.

Fix Suggestion: Replace the fence assembly if worn locking components no longer hold the fence firmly.

Prevention Tip: Keep the locking mechanism clean and avoid forcing the handle during operation.

Fence Misalignment

Quick Check: Measure the distance between the fence and blade at both the front and rear.

Fix Suggestion: Install a new fence assembly if adjustment cannot restore proper alignment.

Prevention Tip: Verify fence alignment periodically, especially after transporting the saw.

Rough Fence Movement

Quick Check: Slide the fence across the rails and check for sticking or uneven travel.

Fix Suggestion: Replace the fence assembly if damaged guide surfaces prevent smooth movement.

Prevention Tip: Clean the guide rails regularly and remove sawdust buildup after each use.

Inaccurate Rip Measurements

Quick Check: Compare the fence scale with an actual blade-to-fence measurement.

Fix Suggestion: Replace the fence assembly if wear or damage prevents accurate positioning.

Prevention Tip: Confirm measurement accuracy before making precision cuts.

Customer Experience: The Dewalt N638742 32" Fence Assembly fit perfectly on my saw. The fence locks firmly, slides easily, and my rip cuts are accurate again.