Generac Delco G060108 Generator Oil Pressure Switch 10PSI

The Generac Delco G060108 Generator Oil Pressure Switch 10PSI is an engine-based component that monitors oil pressure inside the generator. It sends a signal based on oil pressure conditions, helping the generator's control system protect the engine from operating when oil pressure falls below the required level.

This part is designed to resolve the following problems:

• The generator displays a low oil pressure warning.

• Engine shuts down unexpectedly during operation.

• Oil leaks around the pressure switch.

• False oil pressure alarms occur.

• Switch fails to send the correct oil pressure signal.

Low Oil Pressure Warning Appears

Quick Check: Verify the engine oil level and inspect the switch wiring for loose or damaged connections.

Fix Suggestion: Test the oil pressure switch for proper operation and replace it if it is no longer responding accurately.

Prevention Tip: Check engine oil regularly and inspect electrical connections during scheduled maintenance.

Generator Shuts Down Unexpectedly

Quick Check: Observe whether the shutdown occurs immediately after startup or while the generator is running.

Fix Suggestion: Inspect the oil pressure switch and related wiring to determine whether an incorrect signal is triggering the shutdown. Replace the switch if necessary.

Prevention Tip: Follow recommended maintenance intervals and use the correct engine oil grade.

Oil Leakage Around the Switch

Quick Check: Inspect the base of the switch for oil seepage or visible leaks.

Fix Suggestion: Replace the oil pressure switch if the housing or seal has failed and is allowing oil to escape.

Prevention Tip: Avoid overtightening the switch during installation and inspect seals whenever servicing the engine.

False Oil Pressure Signal

Quick Check: Check whether warning messages appear even though the engine has the proper oil level and pressure.

Fix Suggestion: Examine the switch and wiring for faults. Install a new switch if it continues sending incorrect pressure readings.

Prevention Tip: Protect electrical connectors from moisture and corrosion to maintain accurate signal transmission.

Customer Experience: Many generator owners notice that replacing a faulty oil pressure switch eliminates unexpected shutdowns and nuisance warning messages.