Graco 16N928 Sprayer Switch Kit

The Graco 16N928 Sprayer Switch Kit supplies applicable switching components for a paint sprayer control assembly, supporting operation of designated electrical functions.

This part addresses the following common issues:

• Switch kit provides no control response.

• Kit components shift within panel.

• Switching becomes inconsistent during operation.

• Switch component develops visible cracks.

• Connections become loose within assembly.

No Control Response

Quick Check: Operate the applicable switch and observe whether the connected sprayer function reacts to the selected control position.

Fix Suggestion: Have the switching circuit and kit components evaluated when the control produces no expected response.

Prevention Tip: Keep the switch assembly protected from overspray and unnecessary physical handling.

Component Movement

Quick Check: Watch the switch area during operation and note whether a component shifts excessively from its intended mounting position.

Fix Suggestion: Restore the affected component to its proper mounting location using the applicable service information.

Prevention Tip: Handle the sprayer carefully to reduce impact around the control panel.

Inconsistent Switching

Quick Check: Operate the control repeatedly and observe whether the sprayer responds differently to otherwise normal switch selections.

Fix Suggestion: Have the switch components and connections evaluated for poor contact or deterioration, then service the affected part.

Prevention Tip: Include the switch assembly during periodic electrical control maintenance.

Cracked Component

Quick Check: Examine accessible kit components for cracks, broken mounting sections, distortion, or other visible damage.

Fix Suggestion: Renew the affected component when physical deterioration interferes with proper switching or mounting.

Prevention Tip: Keep moisture, overspray, and impact away from the switch assembly.

Customer Experience: After replacement, the switch assembly should allow the sprayer control to respond properly when the operator selects the intended switch position.