Husky E106670 Valve Plate Kit

Product Overview:

Controls the intake and discharge movement of air within the compressor pump assembly to support the air compression cycle. The Husky E106670 Compressor Valve Plate Kit is a replacement pump component for applicable Husky air compressors, where it forms part of the internal valve arrangement between the cylinder and compression chamber. The kit provides the valve-related components required for controlled air movement within the pump during normal compressor operation.

Compression Cycle:

The valve plate assembly controls the movement of air as the piston travels through the compressor cylinder. During the intake portion of the cycle, air enters the compression chamber through the designated intake pathway. As the piston moves through compression, the discharge pathway directs compressed air toward the outlet side of the pump. This controlled sequence allows the pump to repeatedly draw in and compress air during normal operation.

Pump Airflow Regulation:

The valve plate kit forms part of the internal airflow-control structure within the compressor pump. Its valve-related surfaces manage the movement of air through the pump during the alternating intake and discharge portions of operation. This function allows the compression chamber to receive incoming air and direct compressed air toward the designated outlet pathway.

Replacement Guidelines:

Replacing the Compressor Valve Plate Kit if the valve plate or associated components are cracked, warped, corroded, damaged, or excessively worn. The part number E106670 should be verified before replacement to ensure the correct component is selected. Inspect the valve surfaces, sealing areas, mounting points, and connected compressor components for signs of wear or damage. Replace the kit if deterioration affects proper valve operation, sealing, or compressor performance.

Common Failure Symptoms:

• Reduced air pressure output.
• Compressor operation without normal pressure buildup.
• Internal air leakage within the pump.
• Abnormal sounds from the compression assembly.
• Irregular compressor pressure generation.

Equipment Compatibility:

The Husky E106670 Compressor Valve Plate Kit should be matched with the applicable compressor pump configuration. Before purchasing, verify the compressor model, existing part number, equipment application, and manufacturer documentation to confirm that the valve plate kit corresponds with the intended air compressor.

The Husky E106670 Valve Plate Kit is a paint sprayer valve element that serves to regulate coating movement through the valve assembly during material delivery and spraying.

This part fixes the following symptoms:

• Paint flow becomes uneven during spraying.

• Coating movement through the valve becomes restricted.

• Paint appears around the valve plate area.

• Sprayer output changes during continuous operation.

• Valve plate movement becomes irregular.

Uneven Coating Flow

Quick Check: Watch the material stream for changes while spraying continuously.

Fix Suggestion: Clear residue that interferes with the valve plate passage.

Prevention Tip: Remove leftover coating from valve passages after each use.

Restricted Material Passage

Quick Check: Observe whether coating moves freely through the valve assembly.

Fix Suggestion: Flush suitable cleaning solution through the affected passage carefully.

Prevention Tip: Prevent coating from drying inside the valve assembly between uses.

Valve Plate Leakage

Quick Check: Look for fresh coating around the valve plate seating area.

Fix Suggestion: Re-seat the plate evenly against its designated contact surface.

Prevention Tip: Keep valve seating surfaces free from dried coating buildup.

Irregular Plate Movement

Quick Check: Observe the plate response while material moves through the valve.

Fix Suggestion: Remove particles that may interfere with normal plate movement.

Prevention Tip: Filter coating material when appropriate to limit particle entry.

Customer Experience: A customer shared that the E106670 Valve Plate Kit provided steady coating movement during spraying. The paint sprayer maintained a consistent stream during regular operation.

• What does the Husky E106670 valve plate kit control?

  It controls airflow through the compressor pump's intake and discharge passages during compression cycles.

• How can a valve plate affect compressor pressure output?

  Proper valve operation allows the pump to build and maintain air pressure efficiently.

• What can cause valve plate components to wear?

  Repeated pressure cycles, physical damage, and deterioration can affect valve performance.

• Why is the valve plate kit important?

  It supports proper airflow and compression within the compressor pump.

• What indicates valve plate deterioration?

  Difficulty building pressure, reduced compression, or visible component damage may indicate wear.

• 2026 Top 5 Airless Paint Sprayers: Ranked by Speed, Efficiency & Real Results Jun 29, 2026