Jet PM2700-114C Shaper Magnetic Switch

Product Overview:

Controls the electrical starting and stopping of the shaper motor through a magnetic switching mechanism. The JET PM2700-114C Shaper Magnetic Switch is designed for 460V, 3-phase shaper configurations and serves as the motor control interface within the machine's electrical system. Its magnetic switching design manages motor power during normal shaper operation.

Motor Control:

Provides the switching function required within the shaper's motor-control circuit for the specified electrical configuration. The switch supports the control of the motor circuit as part of the machine's electrical operating system.

Electrical System Integration:

Works with the shaper's related electrical control components as part of the motor-control arrangement. Its position within the electrical system maintains the intended relationship between the switching component and the surrounding control circuitry during machine operation.

Replacement Guidelines:

Replacing the Jet PM2700-114C Shaper Magnetic Switch when physical damage, electrical failure, deterioration, or loss of switching function affects the motor-control system. Replacement may be necessary when the switch responds inconsistently or can no longer maintain its intended operating state.

Common Failure Symptoms:

• Shaper motor does not respond to the normal control command.
• Motor-control operation becomes intermittent.
• Switching response becomes inconsistent during operation.
• The switch does not maintain its intended operating state.
• Motor operation is interrupted during normal use.
• Visible physical damage or deterioration is present on the switch.

Equipment Compatibility:

Verify that part number PM2700-114C corresponds to the PM2700 shaper configured for 460V operation. Compare the equipment model, voltage configuration, existing component information, and applicable manufacturer parts documentation before purchase. The 460V configuration should be confirmed because the manufacturer documentation distinguishes the electrical control components used for different voltage configurations.

• What should be considered when selecting a magnetic switch for a 460V shaper?

  The switch is specified for 460V, 3-phase shaper configurations, so the equipment’s electrical configuration should be confirmed before selection.

• What does the JET PM2700-114C Shaper Magnetic Switch control?

  It controls the electrical starting and stopping of the shaper motor through its magnetic switching mechanism.

• What can cause intermittent operation of a shaper magnetic switch?

  Physical damage, electrical failure, deterioration, or loss of switching function may cause inconsistent operation.

• What may happen if a shaper magnetic switch loses its intended switching function?

  Motor-control operation may become interrupted, or the shaper motor may fail to respond normally to control commands.

• How can the correct JET PM2700-114C magnetic switch be identified?

  Compare the PM2700-114C part number, equipment model, voltage configuration, and applicable manufacturer parts documentation.