Kobalt CW220000AV Pressure Switch 1/4"NPT 145PSI-ON 175PSI-OFF

Product Overview:

Controls compressor operation by responding to changes in compressed-air pressure and switching the connected electrical circuit at defined pressure points. The Kobalt CW220000AV Compressor Pressure Switch 1/4"NPT 145PSI-ON 175PSI-OFF provides pressure-based control for starting and stopping the compressor within the specified operating range.

Pressure Sensing and Response:

Responds to changes in compressed-air pressure within the system and changes its switching state when the pressure reaches the defined control points. This pressure-responsive action allows the component to monitor system conditions and initiate the appropriate electrical response.

Compressor Cycle Control:

Regulates the compressor's operating cycle by responding to changes in system pressure. As pressure moves between the established switching thresholds, the component changes its electrical state to support the corresponding start or stop cycle of the compressor.

Replacement Guidelines:

Replace the Kobalt CW220000AV Compressor Pressure Switch when it fails to respond at the specified pressure points or no longer consistently controls the compressor circuit. Replacement may also be required when the threaded connection or electrical connection shows visible damage.

Common Failure Symptoms:

• Compressor does not start at the expected pressure.
• Compressor does not stop at the specified pressure.
• Compressor cycles inconsistently.
• Switch does not change the connected electrical circuit as pressure changes.
• Threaded or electrical connections show visible damage.

Equipment Compatibility:

Verify that part number CW220000AV matches the existing pressure switch before purchase or installation. Confirm the compressor's required pressure settings, threaded connection, electrical arrangement, and operating configuration to ensure the replacement corresponds with the application.

• What should be inspected on a compressor pressure switch?

  Inspect the threaded and electrical connections for visible damage and check whether the switch changes the connected electrical circuit at the expected pressure points.

• What happens if a compressor pressure switch does not switch at the expected pressure?

  The compressor may fail to start or stop at the intended pressure point, affecting its normal operating cycle.

• How does the Kobalt CW220000AV Compressor Pressure Switch respond to pressure changes?

  It responds to changes in compressed-air pressure by changing its electrical state when system pressure reaches the defined control points.

• What signs may indicate a compressor pressure switch is not operating correctly?

  Failure to start or stop at the expected pressure, inconsistent compressor cycling, failure to change the connected electrical circuit, or visible connection damage may indicate a problem.

• How can I verify Kobalt CW220000AV before ordering?

  Confirm that part number CW220000AV matches the Kobalt Compressor Pressure Switch identified in the applicable manufacturer parts documentation.

• How to Troubleshoot and Replace a Kobalt Lawn Mower Part: A Step-by-Step Guide Sep 01, 2025