Mi-T-M 50-0052 Adjustable Chemical Injector 2.1mm Orifice

The Mi-T-M 50-0052 Adjustable Chemical Injector with a 2.1mm orifice draws detergent into the pressure washer water stream and lets the operator adjust chemical flow for different cleaning applications.

Common Issues:

• Chemical injection stops working.

• Detergent flow becomes inconsistent.

• Injector opening becomes restricted.

• Chemical concentration is incorrect.

• Cleaning performance decreases.

Chemical injection stops working

Quick Check: Inspect the injector for debris or chemical buildup around the inlet and outlet areas.

Fix Suggestion: Clean the injector passages and confirm the chemical supply line is properly connected.

Prevention Tip: Flush the injector with clean water after chemical use.

Detergent flow becomes inconsistent

Quick Check: Check the chemical hose and injector connections for blockages.

Fix Suggestion: Remove restrictions and verify the injector creates a steady chemical draw during operation.

Prevention Tip: Use compatible cleaning solutions and maintain clean chemical lines.

Injector opening becomes restricted

Quick Check: Inspect the 2.1mm orifice area for residue or buildup.

Fix Suggestion: Clean the orifice carefully to restore proper chemical flow.

Prevention Tip: Avoid leaving chemical solution inside the injector after use.

Chemical concentration is incorrect

Quick Check: Inspect the adjustable injector setting and chemical supply condition.

Fix Suggestion: Adjust the injector control and verify proper chemical pickup performance.

Prevention Tip: Follow recommended dilution ratios for cleaning solutions.

Customer Experience: The Mi-T-M 50-0052 Adjustable Chemical Injector improved chemical application consistency and made pressure washer cleaning tasks better efficient.