MTD 713-05276 Chainsaw Chain 16"
Specifications:
| Attribute | Details |
|---|---|
| Brand | MTD |
| Part Number | 713-05276 |
| Component Type | Chain |
| Nominal Bar Length | 16 inches |
| Application | Chainsaw |
Description
Dimensions:
- Weight: 0.41 lbs
Product Overview:
Transfers cutting power from the chainsaw drive system to the cutting surface, allowing the saw to cut through wood during operation. The MTD 713-05276 Chainsaw Chain 16" is designed for use with a designated 16-inch chainsaw bar, providing the cutting link arrangement required for routine cutting tasks. As an OEM replacement component, it is intended to restore the specified chain configuration when the original chain requires replacement.
Cutting Link Configuration:
A properly matched chain uses cutting links and drive links arranged to engage with the guide bar and drive sprocket. This configuration supports controlled chain movement and consistent cutting action when the chain specifications match the chainsaw manufacturer's requirements.
Bar And Sprocket Fit:
Correct chain fit depends on the guide bar length, chain pitch, gauge, and drive-link count. Matching these specifications to the chainsaw's designated setup helps maintain proper engagement with the bar and drive sprocket during operation.
Replacement Guidelines:
Replace the MTD 713-05276 Chainsaw Chain 16" if cutting performance declines, the chain becomes excessively stretched, or its cutters and drive links show significant wear. A qualified technician should inspect the chain, guide bar, and drive sprocket to confirm the cause of poor cutting performance and verify the correct replacement specifications before installation.
Common Signs of Wear:
- Reduced cutting speed despite proper chain sharpening
- Uneven or rough cutting through wood
- Excessive chain stretching or repeated tension loss
- Bent, chipped, or missing cutting teeth
- Stiff or binding chain links during movement
Equipment Compatibility:
The MTD 713-05276 Chainsaw Chain 16" is intended for chainsaw applications requiring a 16-inch chain, but bar length alone does not confirm fitment. Check the OEM parts reference for the exact chainsaw model and serial number, then verify the required chain pitch, gauge, and drive-link count against the manufacturer's parts diagram. Do not select this chain based only on the MTD brand or guide bar length.
The MTD 713-05276 Chainsaw Chain 16" focuses on identifying dull cutting, improper tension, poor lubrication, and bar misalignment to restore smooth, safe cutting performance.
Common Issues:
• Chain becomes dull quickly on MTD 713-05276 after cutting hardwood or dirty wood.
• Chain tension loosens frequently during operation causing uneven cutting performance.
• Excessive vibration occurs due to improper installation of 16-inch chain on guide bar.
• Chain fails to engage wood properly due to poor lubrication or oil flow blockage.
• Chain derailment happens when bar alignment is off or sprocket wear increases.
Dull Cutting Performance
Quick Check: Inspect cutting teeth condition and check for rounded or chipped edges on the 16-inch chain.
Fix Suggestion: Sharpen or replace the MTD 713-05276 chain to restore efficient cutting ability.
Prevention Tip: Avoid cutting dirty or embedded wood debris that accelerates tooth wear.
Chain Tension Slippage
Quick Check: Check if the chain loosens after short operation or shifts on the bar.
Fix Suggestion: Re-adjust tension and ensure correct installation on guide bar sprocket alignment.
Prevention Tip: Regularly tighten chain before each use to maintain stable cutting control.
Improper Lubrication Blockage
Quick Check: Observe dry chain movement or reduced oil distribution on bar surface.
Fix Suggestion: Clean oil ports and ensure proper bar oil flow to the chain system.
Prevention Tip: Always use clean bar oil and check reservoir before operation.
Chain Derailment / Bar Misalignment
Quick Check: Inspect chain seating on bar rails for uneven positioning or slack.
Fix Suggestion: Realign guide bar and replace worn sprocket components if needed.
Prevention Tip: Avoid operating with loose bar nuts or worn drive components.
Customer Experience: Users report the MTD 713-05276 16" chain delivers smooth cutting once properly tensioned, with noticeable improvement after correct lubrication and alignment adjustments during routine maintenance.
-
What cutting function does the MTD 713-05276 Chainsaw Chain perform?
It provides the moving cutting teeth that engage wood as the chain travels around the chainsaw guide bar.
-
How does the chain connect with the chainsaw's drive system?
Its drive links engage the guide bar groove and drive sprocket, allowing the chain to travel around the bar during operation.
-
What should be checked to confirm compatibility with a chainsaw?
Compare the required guide bar length, chain pitch, gauge, and drive-link count with the specifications of the MTD 713-05276 chain.
-
What chain conditions can indicate a need for replacement?
Damaged cutting teeth, bent or separated links, and excessive wear can indicate that the chain needs replacement.
-
When is the MTD 713-05276 a suitable replacement choice?
It is a replacement option when the existing chain is worn or damaged and the equipment requires a chain matching the 16-inch guide bar and the listed chain specifications.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More