Murray 770797 Snowblower Auger Belt

Murray 770797 Snowblower Auger Belt helps transfer rotary movement to the auger mechanism, supporting the belt-driven connection needed for snow intake and discharge operation.

This part addresses the following common issues:

• Auger speed fluctuates during use.

• Belt develops a roughened surface.

• Auger engagement feels weak.

• Belt shifts toward one pulley edge.

• Drive noise changes with auger load.

Fluctuating Auger Speed

Quick Check: Observe the auger while processing snow and note whether its rotation repeatedly rises and falls.

Fix Suggestion: Inspect the belt for wear or loss of tension and renew it when belt slip is evident.

Prevention Tip: Check the belt before clearing heavy accumulation.

Rough Belt Surface

Quick Check: Look for rough patches, abrasions, or damaged areas across the belt's outer surface.

Fix Suggestion: Replace a belt with substantial surface deterioration and review nearby components for possible contact.

Prevention Tip: Keep abrasive material away from the belt path.

Weak Auger Engagement

Quick Check: Activate the auger and compare its initial response with normal operation.

Fix Suggestion: Address belt wear that prevents sufficient rotation from reaching the auger mechanism.

Prevention Tip: Include engagement response in routine pre-use checks.

Edge Tracking

Quick Check: Observe whether the belt remains centered rather than moving toward the edge of a pulley.

Fix Suggestion: Restore proper belt routing and investigate continued tracking problems before fitting another belt.

Prevention Tip: Verify belt placement after working around the drive system.

Customer Experience: After replacing the Murray 770797 Snowblower Auger Belt, the owner noticed the auger maintained a steadier rotation during subsequent snow-clearing work.

• Last Minute Mistakes to Avoid When Using Snow Blowers This Winter Jan 27, 2025