Titan 759-380 Paint Sprayer Prime/Spray Valve Assembly

SKU: 759-380 759-380 Brand: Availability:
In Stock
(1)

$72.69


Have a Question? +1 (866) 963-0907

Specifications:

Attribute Details
Brand Titan
Part Number 759-380
Component Type Prime/Spray Valve Assembly
Application Paint sprayer

Description

The Titan 759-380 Prime/Spray Valve Assembly operates as a control system for paint sprayers. This assembly operates as a control center that enables users to move between priming the pump operation and paint spraying. From the prime position the valve directs fluid flow to circulate inside the pump which removes air while maintaining correct material circulation. The valve assembly routes pressurized paint toward the spray hose and gun after changing its position to spray. The replacement of the sprayer with this part enables easier startup and reliable spraying performance while decreasing material waste to achieve quality paint application.

Dimensions:

  • Weight: 2 lbs

Product Overview:

Regulates the selected fluid path during paint sprayer operation, allowing the system to switch between priming and spraying functions. The Titan 759-380 Paint Sprayer Prime/Spray Valve Assembly is an OEM replacement component designed for the designated fluid-control system. Its valve arrangement supports the operating mode selection required for proper sprayer function.

Fluid Path Selection:

By controlling the prime and spray flow paths, the valve assembly supports the change between material circulation and spray delivery. This function helps direct paint through the appropriate route for the selected operating mode.

Valve Control Mechanism:

Engineered for integration into the sprayer's fluid system, the assembly provides the mechanical valve action needed to select the designated flow position. Its operation contributes to the equipment's priming and spraying process.

Replacement Guidelines:

Replace the Titan 759-380 Paint Sprayer Prime/Spray Valve Assembly if the sprayer cannot switch properly between prime and spray modes, fluid continues flowing through the wrong path, or the valve fails to control material flow as intended. A qualified technician should inspect the valve and its related fluid connections before deciding whether the complete assembly requires replacement.

Common Signs of Wear:

  • Sprayer fails to switch between prime and spray modes
  • Paint continues flowing through the incorrect outlet path
  • Valve position does not change as intended
  • Fluid leakage develops around the valve assembly
  • Priming or spray operation becomes inconsistent

Equipment Compatibility:

The Titan 759-380 Paint Sprayer Prime/Spray Valve Assembly is intended for specific Titan paint sprayer configurations. As an OEM replacement component, its fitment should be established by matching the sprayer's complete model and serial number with Titan's illustrated parts documentation. Confirm that part number 759-380 is specified for the prime/spray valve assembly before purchasing.

The Titan 759-380 Paint Sprayer Prime/Spray Valve Assembly directs coating flow between priming and spraying paths, supporting controlled material movement and mode selection during paint sprayer operation.

This part fixes the following symptoms:

• Paint sprayer struggles to move prime and spray positions.

• Coating flow becomes uneven during spraying.

• Paint appears around the valve assembly.

• Valve control feels difficult to turn.

• Material movement changes unexpectedly between operating modes.

Prime/Spray Mode Difficulty

Quick Check: Move the valve control slowly and observe both operating positions.

Fix Suggestion: Clear residue interfering with internal valve movement and position selection.

Prevention Tip: Clean coating from the valve area before residue becomes hardened.

Uneven Coating Flow

Quick Check: Watch the material stream after selecting the spray position.

Fix Suggestion: Clear buildup restricting the valve passage during coating delivery.

Prevention Tip: Use properly prepared coating material to limit internal residue.

Valve Leakage

Quick Check: Look around the assembly for fresh paint traces during operation.

Fix Suggestion: Secure the valve connections while maintaining even component seating.

Prevention Tip: Keep valve contact surfaces clean before operating the sprayer.

Stiff Valve Control

Quick Check: Turn the control gently and note unusual resistance during movement.

Fix Suggestion: Remove accessible coating residue affecting the valve control mechanism.

Prevention Tip: Wipe exposed valve areas after spraying before material dries.

Customer Experience: A customer noticed smoother movement between priming and spraying with the Titan 759-380 Paint Sprayer Prime/Spray Valve Assembly. Coating flow remained steady during regular spraying.

Disclaimer: Troubleshooting guidance provided for reference only.
  • What does the Titan 759-380 Prime/Spray Valve Assembly control?

    It controls the fluid path selection between the sprayer's priming and spraying modes, directing material through the appropriate route for the selected function.

  • Will Titan 759-380 fix a paint sprayer that will not switch from prime to spray?

    A faulty prime/spray valve can cause mode-selection problems. However, the complete fluid-control system should be inspected by a qualified technician to identify the actual cause before replacing the valve.

  • How can I confirm the 759-380 valve fits my Titan paint sprayer?

    Use the sprayer's model and serial number to locate its official Titan parts diagram. Confirm that 759-380 is listed for the prime/spray valve assembly.

  • What symptoms indicate a leaking Titan prime/spray valve?

    Paint or fluid escaping around the valve body or its connection points may indicate a sealing or assembly problem. Inspection can help determine whether the valve assembly needs replacement.

  • Is the Titan 759-380 intended for the priming function or spray delivery?

    It supports both operating modes by selecting the appropriate fluid path for priming or spraying. Its exact application should be confirmed against the parts documentation for the specific sprayer model.

Customer Reviews

5 Based on 1 reviews
5 ★
1
4 ★
0
3 ★
0
2 ★
0
1 ★
0
1 review
  • Flow Switching
    Anna —

    Sprayer now primes correctly, paint flow consistent for small fence

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More