Titan 805-216A Paint Sprayer Pusher Assembly

The Titan 805-216A Paint Sprayer Pusher Assembly is an inlet-valve component for compatible Titan airless sprayers, designed to actuate the valve during intake and support consistent paint flow through the pump.

Common Symptoms:

• Sprayer struggles to prime or takes unusually long to draw paint.

• Spray pressure drops during operation or fluctuates unexpectedly.

• Paint intake becomes intermittent during the pump cycle.

• Pusher movement appears restricted within the fluid section.

• The pusher or associated O-ring shows visible wear or damage.

Poor Priming

Quick Check: Confirm the inlet valve moves freely and the pusher contacts it correctly.

Fix Suggestion: Clear residue around the valve area and assess pusher movement.

Prevention Tip: Flush suitable cleaning fluid through the pump after material use.

Pressure Drops During Spraying

Quick Check: Observe whether pressure decreases when the spray gun is operating continuously.

Fix Suggestion: Examine the pusher, inlet valve, and nearby sealing surfaces for wear.

Prevention Tip: Keep the fluid section clean to reduce buildup around moving components.

Intermittent Paint Intake

Quick Check: Watch the intake cycle for inconsistent paint movement into the pump.

Fix Suggestion: Verify the pusher actuates the inlet valve throughout each intake stroke.

Prevention Tip: Use properly filtered coating material to limit debris entering the pump.

Pusher Movement Restriction

Quick Check: With the sprayer depressurized, check for binding around the pusher assembly.

Fix Suggestion: Remove accumulated material and assess adjacent components for mechanical interference.

Prevention Tip: Follow the sprayer cleaning procedure after extended painting sessions.

Customer Experience: One operator reported that after servicing the inlet-valve area and addressing the pusher assembly, the pump cycle became more consistent.