Toro 136-6600-03 Snow Blower Lh Auger

Product Overview:

Rotates within the snow blower’s auger housing to collect and move snow toward the center of the machine for processing by the impeller and discharge system. The Toro 136-6600-03 Snow Blower LH Auger is an OEM replacement component. Designed for the left-hand side of the auger assembly, it works with the associated drive mechanism to support snow collection and movement during clearing operations. Maintaining the auger’s condition and alignment helps support effective snow handling.

Snow Collection:

The auger engages snow at the front of the machine and moves it inward toward the impeller area, where the snow can be discharged through the chute. Proper auger condition supports consistent snow collection and movement through the housing. Damage, deformation, or restricted rotation may interfere with this process and reduce clearing effectiveness.

Auger Positioning:

The LH designation identifies the auger intended for the left-hand position within the specified assembly. Correct side placement is important because auger components may have different orientations, shapes, or connection arrangements. Verify the installation position and original part number against the manufacturer’s parts diagram before replacement.

Replacement Guidelines:

Replace the Toro 136-6600-03 Snow Blower LH Auger if it is bent, cracked, significantly deformed, or damaged in a way that affects proper rotation or snow movement. Inspect the opposing auger, drive connections, mounting hardware, and surrounding housing for related damage.

Common Signs of Wear:

• Bent or deformed auger flighting.
• Cracks or visible structural damage.
• Unusual vibration during auger operation.
• Rubbing or scraping against the auger housing.
• Irregular rotation or restricted movement.

Equipment Compatibility:

The Toro 136-6600-03 Snow Blower LH Auger is an OEM replacement part intended for compatible Toro snow blower models that specify this particular part number. Verify the complete model and serial numbers against Toro’s official parts documentation to confirm compatibility and the correct left-hand application before ordering.

The Toro 136-6600-03 Snow Blower LH Auger is used to collect snow from the left side of the auger housing and move it toward the impeller. It supports balanced snow intake and reliable auger operation in suitable Toro snow blower models.

Common Issues:

• Left-side auger section moves snow unevenly.

• Auger flight becomes damaged from impact with hard objects.

• Snow intake performance decreases during operation.

• Auger rotation becomes inconsistent.

• Snow blower experiences reduced clearing efficiency.

Left-Hand Auger Feeds Snow Unevenly

Quick Check: Observe whether the left side of the auger housing collects and moves snow consistently during operation.

Fix Suggestion: Inspect the Toro 136-6600-03 Snow Blower LH Auger for proper placement, visible damage, and smooth movement within the auger assembly.

Prevention Tip: Remove packed snow and ice from the auger housing after each use to maintain steady snow movement.

Auger Flight Becomes Damaged After Impact

Quick Check: Examine the LH auger flight for bends, cracks, or signs of contact damage.

Fix Suggestion: Check the auger assembly alignment and inspect nearby components for conditions that may affect proper rotation.

Prevention Tip: Clear the operating area of hidden objects such as rocks or branches before snow removal.

Snow Intake Performance Decreases

Quick Check: Monitor whether the auger effectively gathers snow and transfers it toward the impeller area.

Fix Suggestion: Inspect the auger surface for excessive wear, ice buildup, or obstructions affecting snow collection.

Prevention Tip: Clean the auger housing and surrounding areas after completing snow clearing tasks.

Auger Rotation Becomes Uneven

Quick Check: Watch the auger assembly while running to identify irregular movement or vibration.

Fix Suggestion: Inspect the LH auger connection points and related drive components for loose or misaligned parts.

Prevention Tip: Perform seasonal inspections of the auger system before heavy winter use.

Customer Experience: A customer reported that replacing a worn LH auger with the Toro 136-6600-03 Snow Blower LH Auger helped restore smoother snow intake and improved overall clearing consistency.

• What does the LH designation mean on this auger?

  LH stands for left-hand and identifies the intended side of the auger assembly. Confirm the correct orientation using the equipment’s parts diagram because installation positions and viewing directions can vary by design.

• How does the auger contribute to snow-clearing performance?

  The auger engages snow and moves it toward the impeller area, where it can be directed through the discharge chute. Its condition affects how consistently snow is collected and transferred.

• Can a bent auger affect the rest of the snow blower?

  Yes. A bent auger may cause vibration, interfere with housing clearance, or place additional stress on drive and mounting components. Inspect the related assembly if damage is found.

• Should the opposite-side auger be inspected during replacement?

  Yes. Inspect the opposing auger and shared components for wear, deformation, or impact damage. This helps identify related problems that could affect operation after replacement.

• How can I verify that part 136-6600-03 fits my Toro snow blower?

  Locate the equipment’s complete model and serial numbers and compare them with Toro’s official parts documentation. Confirm the left-hand designation and exact part number before purchasing.