Campbell Hausfeld SR130019SV Compressor Pressure Switch Regulator Kit

The Campbell Hausfeld SR130019SV Compressor Pressure Switch Regulator Kit combines pressure control and air regulation into a single assembly for compressed air systems. It automatically controls system cycling while allowing regulated air delivery to connected pneumatic tools, helping maintain steady air supply and consistent operation.

This part helps with the following common issues:

• Outlet air pressure cannot be adjusted.

• Compressor does not cycle properly.

• Air leaks from the regulator or fittings.

• Regulator knob becomes difficult to turn.

• Pressure output fluctuates during operation.

Regulated Air Pressure Won't Adjust

Quick Check: Rotate the regulator knob while observing the outlet pressure gauge for any change.

Fix Suggestion: Inspect the regulator mechanism for internal wear or damage. Replace the regulator kit if pressure adjustment no longer functions properly.

Prevention Tip: Avoid forcing the adjustment knob beyond its operating range and keep the regulator free of debris.

Compressor Cycles Improperly

Quick Check: Observe whether the compressor starts and stops at normal pressure levels.

Fix Suggestion: Examine the pressure switch section for worn contacts or pressure-sensing issues. Replace the kit if automatic cycling becomes unreliable.

Prevention Tip: Inspect pressure control components during routine compressor maintenance.

Air Leaks Around the Assembly

Quick Check: Listen for escaping air around the regulator, fittings, and hose connections while the compressor is pressurized.

Fix Suggestion: Tighten loose fittings or replace the kit if damaged seals or housing components continue leaking.

Prevention Tip: Check threaded connections periodically and replace worn seals before leaks develop.

Unstable Outlet Pressure

Quick Check: Monitor the pressure gauge while operating air tools to see if the output pressure changes unexpectedly.

Fix Suggestion: Inspect the regulator assembly for worn internal components affecting pressure control. Replace the regulator kit if pressure remains inconsistent.

Prevention Tip: Drain compressor moisture regularly to help protect internal regulator components.

Customer Experience: After installing the replacement kit, users often notice that both compressor cycling and air pressure adjustment become more predictable. Many also mention smoother tool performance because the regulated air pressure remains stable throughout operation.

• How to Replace a Campbell Hausfeld Air Compressor Motor: Step-by-Step Guide Aug 03, 2026